Technical Data Sheet - Page 05
SUB-ZERO DE-ICER
Description
A high-grade, purified methanol, blended with trace amounts of a strong detergent-like additive. Specifically developed to produce a powerful jet-stream, this aerosolized formula rapidly melts ice at temperatures as low as -40 C.
Application
May be employed to melt moderate layers of ice on many surfaces. Especially effective on glass windshields, where wiper-blade action leaves a clean streak-free finish. Will loosen ice on head and tail lights or coated door locks, trunks and hoods. Advanced spraying will help to prevent frost and ice from forming. Will not harm chrome, rubber, etc.
Directions for use
Brush away snow and spray upper half of windshield. When ice begins to melt, free wipers and turn them on. A second application may be necessary for thick ice. To remove frost from inside windshield, and to prevent condensation, spray lightly on a clean cloth and wipe glass. Do not use on door lock or windshield wiper mechanism. Do not spray product onto painted surfaces.
Specifications
| Appearance | Clear, Colourless |
| Specific Gravity (@ 21 C) | 0.86 – 0.90 |
| pH (@ 25 C) | Not Applicable |
| Non-Volatile (Aerosol, % by wt) | < 1% |
| Vapour Pressure (@ 21 C) | 85 to 100 psig |
| Spray Pattern (@ 21 C) | Jet Stream |
| Spray Rate (10s, @ 21 C) | 70 to 75 g/10 s |
Outstanding Properties
-
Quickly melts ice
-
Melts ice on windshields at temperatures as low as -40 C
-
Leaves a clean, streak-free finish
-
Provides better visibility for safer driving
-
Defogs inside car windows
Label information
WHMIS: A, B5, D1B, D2A, D2B
HAZARD SYMBOLS:
| Flammability | DANGER |
| Toxicity | DANGER |
| Explosiveness | CAUTION |
Primary hazard statement(s):
- EXTREMELY FLAMMABLE
- POISON
- CONTAINER MAY EXPLODE IF HEATED
Additional hazard statements:
Contents under pressure. Do not place in hot water or near radiators, stoves, or other sources of heat. Do not puncture or incinerate container or store at temperatures over 50 C.
May cause blindness if swallowed. Avoid contact with eyes. Cannot be made non-poisonous. Use only in a well-ventilated area. Keep away from heat and open flames.
First aid treatment
In case of contact with eyes, flush thoroughly. If swallowed, induce vomiting if patient is alert. Call physician or poison control centre immediately. Contains methyl alcohol.
Recommended sizing
211 x 604 can – 312 g
For health and safety information refer to the appropriate MSDS
The information herein is to assist customers in determining whether our products are suitable for their applications. We request that customers inspect and test our products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent inferred.
SALT AWAY
Description
A concentrated product to neutralize all salts and deposits that accumulate during winter. A superior product with the ability to attack winter hazards.
Application
Eliminates corrosion of all salts when used regularly. It can eliminate chemical attacks on carpet, walkway and floor finishes. Neutralizes salt build up on track-off mats. Able to prevent corrosion of door pins and metal thresholds of door entrances.
Directions for use
Shake well before each use. Hold can upright, about 15 cm (6") away, and spray spot. Test Salt Away first on an inconspicuous area. Allow to stand for one minute. Place fold paper towel or cloth over the spot, and absorb by pressing down with foot or hand. On stubborn stains, repeat one or twice, if necessary. Keep away from children and pets.
Specifications
| Appearance | Clear, Colourless |
| Specific Gravity (@ 21 C) | 0.9 -1.1 |
| pH (@ 25 C) | 10.5 -11.5 |
| Non-Volatile (Aerosol, % by wt) | 1 -2 |
| Vapour Pressure (@ 21 C) | 55 to 65 psig |
| Spray Pattern (@ 21 C) | Conical |
| Spray Rate (10s, @ 21 C) | 68 to 74 g/10 s |
Outstanding Properties
-
Excellent penetration
-
Compatible with numerous substrates
-
Rapid action for faster clean-ups
Label information
WHMIS: A, D2A, D2B, E
HAZARD SYMBOLS:
| Flammability | DANGER |
| Toxicity | DANGER |
| Explosiveness | CAUTION |
Primary hazard statement(s):
- CONTAINER MAY EXPLODE IF HEATED
Additional hazard statements:
Do not use in presence of open flame or spark. Contents under pressure. Do not place in hot water or near radiators, stoves, or other sources of heat. Do not puncture or incinerate container or store at temperatures over 50C. Use under well ventilated conditions. Contains sodium hydroxide.
First aid treatment
In case of contact with eyes, flush thoroughly. If swallowed, induce vomiting if patient is alert. Call physician or poison control centre immediately. Contains methyl alcohol.
Recommended sizing
211 x 604 can - 340 g
For health and safety information refer to the appropriate MSDS
The information herein is to assist customers in determining whether our products are suitable for their applications. We request that customers inspect and test our products before use, and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of our products.
SNOW GUARD SPRAY
Description
Superbly emulsified with high quality silicones and special cleaning ingredients that keeps snow from sticking to plows. A professional formula for today's demanding industrial and institutional markets.
Application
May also be used on lawn mowers to keep grass and cutting from sticking into the blades. Can also be applied to mouldboards, shovels and truck beds. Snow Guard Spray is used by municipalities, garages, highway equipment companies, sanitation companies and snow removal contractors.
Directions for use
Shake well. Remove protective cap. Hold container upright 20-30 cm from surface to be polished. Spray as required. Apply directly onto cloth when polishing confined areas.
Specifications
| Appearance | Clear, Colourless |
| Specific Gravity (@ 21 C) | 0.80 – 0.90 |
| Viscosity (Brookfield, SPN #2, @ 20 RPM, @ 21°C) | n/a |
| pH (@ 25 C) | n/a |
| Non-Volatile (Aerosol, % by wt) | 1 – 5% |
| Vapour Pressure (@ 21 C) | 45-55 psig |
| Spray Pattern (@ 21 C) | Fan |
| Spray Rate (10s, @ 21 C) | 15-17 g/10 s |
Outstanding Properties
A professional formula for today's industrial and institutional market. Apply in one effortless operation and save time in cleaning the essential equipment during severe weather. During the summer seasons, same product can be used for garden equipment and utensils.
Actual VOC level
60%
Label information
WHMIS: A, B5, D2B
HAZARD SYMBOLS:
- Flammable aerosol
- Contents under pressure.
Precautions
Keep away from heat, sparks and flame. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Do not puncture or incinerate container or store at temperatures over 50C.
First aid treatment
In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention. For skin, wash thoroughly with soap and water. If affected by inhalation of vapour or spray mist, remove to fresh air. If swallowed, get medical attention.
Recommended sizing
211 x 604 CAN - 510 g
For health and safety information refer to the appropriate MSDS
The information herein is to assist customers in determining whether our products are suitable for their applications. We request that customers inspect and test our products before use, and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent inferred.
GARAGE DOOR SILENCER NT 300
Description
The product consists of selectively blended high performance lubricants and naphthenic oil, petroleum blend of oil, zinc alkyldithio phosphate, and petroleum derived substances. Together with the incorporation of superior grease, the product offers maximum possible lubrication and rust protection to moveable components, even under speeds and friction temperatures.
Application
Where to Use: All Garage door mechanical components. It will quiet noisy doors and operation. It can be applied on track, rollers, cables, pulleys, hinges and other moving parts. This heavy-duty petroleum-based lubricant. will give superior lubrication where high pressures or temperatures cause a breakdown of the protective film formed by ordinary oils.
Directions for use
Shake well before using. Spray 20-30 cm (8-12”) from surface, holding can upright.
Specifications
| Appearance | Amber |
| Specific Gravity (@ 21 C) | 0.87 -0.91 |
| pH (@ 25 C) | n/a |
| Viscosity (Brookfield, @ 25C) | n/a |
| Non-Volatile (Aerosol, % by wt) | 30 - 40 |
| Vapour Pressure (@ 21 C) | 40- 60 psig |
| Spray Pattern (@ 21 C) | Narrow, conical |
| Spray Rate (10s, @ 21 C) | 17 to 25 g/10 s |
| Operating temperature | -40 to 163 C |
Outstanding Properties
- Quick penetrating/lubricating action
- Very good rust inhibition
- Reduces the stress of start-ups and high temperature breakdowns.
Label information
WHMIS: A, B5 D2B
HAZARD SYMBOLS:
Flammability DANGER Toxicity DANGER Explosiveness CAUTION
Primary hazard information
- EXTREMELY FLAMMABLE
- DIRECT INHALATION OF SPRAY MAY BE HARMFUL
- CONTAINER MAY EXPLODE IF HEATED
First aid treatment
If swallowed, call physician or poison control centre immediately. Contains petroleum distillate and acetone.
Additional hazard statements
Contents under pressure. Do not place in hot water or near radiators, stoves, or other sources of heat. Do not puncture or incinerate container or store at temperatures over 50oC. Do not use in presence of open flame or spark. Use under well-ventilated conditions.
Recommended sizing
211 x 604 Can - 340 g
For health and safety information refer to the appropriate MSDS
The information herein is to assist customers in determining whether our products are suitable for their applications. We request that customers inspect and test our products before use, and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent inferred.
ZINC COLD GALVANIZING SPRAY
Description
Provides corrosion protection to ferrous metal surfaces first, as a long-lived coating of practically pure Zinc comparable to that obtained by galvanization and second, through sacrificial anodization. This protection becomes effective when the surface is scratched, broken or corrupted. With the presence of moisture the Zinc coating will corrode while continuing to protect the metal it covers.
Application
Welded joins, guard rails, bridges, metal chain fences, pipes, TV towers, refinery piping, heavy equipment, corrugated metal buildings, etc. Ideal for industrial type application (e.g., Aviation, Marine, Manufacturing, Petroleum). Can be used for above or below the water line in Marine applications.
Directions for use
Wire brush off any loose rust, or sandblast heavy rust or mill scale. Remove grease and oil from surface with a thinner or petroleum solvent. Remove old paint with paint remover and clean with thinner.
For best results use between temperatures of 64 to 86oF (18 to 30oC.)
This product is designed for use only in a well-ventilated area. Use only in areas where fumes from this product will not come in contact with food or food products.
Shake the can vigorously for 30 seconds after the mixing ball is loose. Spray in even strokes from a distance of 10 to 12” (25 to 30 cm). Spray no closer than 10 to 12 inches from surface. Spray light coats with smooth sweeping motion to avoid runs and sags.
Coating sets to touch in 3-5 minutes. Drying may be accelerated by applying heat, blown hot air or baking oven.
One coat will be satisfactory. A second coat may be applied at any time to maximize the protection.
After use, turn aerosol can upside down and depress valve button for several seconds to clear valve and prevent clogging.
Physical characteristics
| COLOR | Matte gray |
| ODOR | Aromatic |
| SPECIFIC GRAVITY (AEROSOL @70oF) | 1.40-1.44 |
| VISCOSITY (ZAHN Cup70oF) | n/a |
| pH (@ 70oF) | n/a |
| SOLIDS CONTENT(Aerosol) | 17.3% |
| VAPOR PRESSURE(@70oF) | 48-58 psig |
| SPRAY PATTER(@70oF) | Conical |
| SPRAY RATE (@70oF) | 26-36g/10sec |
Film characteristics
| COVERAGE: (Aerosol) | 28 to 32 sq.ft/can at 3 MIL thickness |
| HEAT RESISTANCE: Softens at | 150C |
| DRYING TIME Set-to-Touch Dry (0.5to1.0ml@77oF) | 3-5 min |
| Hard Dry (0.5 to 1.0 mil @ 77oF) | 48 hrs |
Outstanding Properties
Meets the requirements of:
- MIL-P-46105(MR) - para. 3.2, 3.3.1, 3.5.8, 4.4.5
- MIP-P-12035(Ships) – para. 3.3.1. 3.3.2, 3.3.3
- DOD-P-21035A (Navy) - para. 3.1, 3.2, 3.5.3, 3.5.6, 4.4.3, 6.1, 6.5,353
- Withstands up to 2000 hours of 5% salt spray (ASTM B-117-64).
Authorized by USDA for use in federally inspected meat and poultry plants as a coating for application to structural surfaces or surfaces where there is a possibility of incidental food contact. This category does not authorize use of the coating on any surface where there is direct or prolonged contact with food. Before applying the coating to equipment, which will subsequently be installed in an official plant, you must obtain clearance from the Equipment Standards and Review Branch, Science and Technology Branch, Washington DC 20250
Carb VOC regulations for:
Complies with Aviation and Marine Primer Category < 2g Ozone/ g product
Label information
HAZARD SYMBOLS:
| Flammability | DANGER |
| Toxicity | WARNING |
| Explosiveness | CAUTION |
Primary hazard statement
- Extremely flammable.
- Vapour harmful.
- Poison.
- Container may explode if heated
Additional hazard statement
Contents under pressure. Do not place in hot water or near radiators, stoves, or other sources of heat. Do not puncture or incinerate container, or store at temperatures above 50 C. Do not use in presence of open flame or spark. Use under well ventilated conditions.
First aid treatment
If swallowed, call physician or poison control centre immediately. Contains acetone and toluene.
Recommended sizing
340 g - 211 x 604 can
For health and safety information refer to the appropriate MSDS
The information herein is to assist customers in determining whether our products are suitable for their applications. We request that customers inspect and test our products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent inferred.